Item # D-GC-#300   

Recommended for cutting: Plywood, general lumber, acrylic

Type of blade: Backsaw / cross cut saw

Blade thickness:0.3mm

TPI: Cross cut:18

Replacement blade: Available (item#S-300)

Handle type:Wood wrapped with cane

A saw with a back to keep the blade straight and allow accurate cuts. #300 saw works well for cutting plywood, general lumber, and plastic materials such as acrylics.

Gyokucho is a popular brand of professional carpentry saws in Japan. They use a method called impulse hardening to increase the durability of the tooth tips. The cutting edge is heated for 0.003~0.005 seconds by applying an electrical current, instantly hardening the surface of the steel while maintaining the flexibility inside. As a result, the saw’s wear resistance increases. The hardened saw tooth is much harder than sharpening files so the blade cannot be sharpened and needs to be replaced once it is dull.

WARNING

This product can potentially expose you to chemicals including lead, nickel and chromium which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warning.ca.gov